Slip Ring for Machinery Industry Use Factory Outlet

• Customization: Available
• Certification: ISO9001, UL, CCC, ISO
• Place of Origin: Shanghai China
• Model NO.: SRS4575
• Material Choice: Imported or National Material
• Certificate: ISO9001, BV, SGS
• Inner Diameter: 45mm
• Outer Diameter: 75mm
• Quality Level: OEM Quality
• Rings: 3 Ring
• Warranty: 12 Month
• Application: Crane, Rolling Machine, Amusement Equipment
• Protection: Corrosion Resistance
• Installation: According to Your Needs
• Housing: Copper
• Transport Package: Blister Card Packing/Normal Polybag/Your Design
• Specification: BV
• Trademark: IUGIS
• Origin: Shanghai China
• HS Code: 85452000
• Production Capacity: 100000pieces/Week

Product Description

Model	d	D	H	L2	L1	M	f	b	e	a	C	M1
SRS83044-3N	8	30	44	2.0	15	?2	2	/	/	/	/	/
SRS123645-3T	12	36	45	10.0	15	M4	2	/	/	/	/	/
SRS183542-3N	18	35	42	8.0	13	?2	4	/	/	/	/	/
SRS203840-3N	20	38	40	10.0	14	?2	2	/	/	/	/	/
SRS20K3845-3T	20	38	45	10.0	16	M4	5	/	/	6	23	/
SRS255454-3T	25	54	54	10.0	16	M4	5	/	/	/	/	/
SRS25K7570-3S	25	75	70	12.0	22	/	6	10	2	8	29	/
SRS28K6874-3S	28	68	74	17.5	23	/	6	10	2	5	31	/
SRS32K7745-3T	32	77	45	8.0	12	M4	4	/	/	/	/	/
SRS33.5K12947-3T	33.5	129	47	8.0	12	M4	3	/	/	8	37.5	/
SRS35K5445-3W	35	54	45	10.0	15	2	4	/	/	6	38	/
SRS356059-3T	35	60	59	9.0	15	M4	5	/	/	/	/	/
SRS35F7049-3N	35	70	49	9	12/8	3	12	/	/	/	/	/
SRS35K8371-3T	35	83	71	10.0	18	M4	3	/	/	8	37.5	/
SRS40K6270-3N	40	62	70	14.0	24	?2.5	4	/	/	/	/	/
SRS40K8090-3S	40	80	90	12.0	25	/	18	10	2	10	44	/
SRS40K9038-3T	40	90	38	8.0	11	M4	4	/	/	7	44.5	/
SRS417737-3T	41	77	37	8.0	12	M4	3	/	/	/	/	/
SRS427060-3S	42	70	60	11.0	20	/	5	5	2	/	/	/
SRS45H6761-3S	45	67	61	10.0	20	/	/	5	2	/	/	2-M6
SRS4513945-3T	45	129	45	8.0	12	M4	4	/	/	/	/	/
SRS45K7570-3S	45	75	70	12.0	22	/	7	10	2	10	49	/
SRS45K7869-3S	45	78	69	12.0	21.5	/	7	10	2	10	49	/
SRS5012954-3T	50	129	54	8.0	12	M4	4	/	/	/	/	/
SRS507047-3S	50	70	47	9.0	12.5	/	7	5	2	/	/	/
SRS50K9077-3S	50	90	77	15.0	27	/	5	14	2	10	55	/
SRS50K90110-3T	50	90	110	8.0	12	M4	30	/	/	8	54	/
SRS52K9276-3S	52	92	76	14.0	27	/	3.5	14	2.5	10	4	/
SRS5410840-3W	54	108	40	7.5	11.5		3	/	/	/	/	/
SRS55K10090-3S	55	100	90	13.5/9	26	/	10	14	2	10	4.5	/
SRS2713054-3N	57	130	115	12.0	30	6	21	/	/	/	/	/
SRS6013054-3T	60	130	54	8.0	12	M4	4	/	/	/	/	/
SRS60107100-3S	60	107	100	14.0	34	/	/	10	2	/	/	/
SRS6010866-3T	60	108	66	8.0	14	M4	4	/	/	/	/	/
SRS60K10885-3S	60	108	85	15.0	25	/	8	12	2	12	65	/
SRS6011572-3T	60	115	72	10.0	19	M4	15	/	/	/	/	/
SRS6012043-3T	60	120	43	9.0	3	M4	3	/	/	/	/	/
SRS60138125-3S	60	138	125	18.0	36	/	11	20	3	/	/	/
SRS60138125-3S	63	108	43	10.0	13	M4	37	/	/	/	/	/
SRS6310843-3T	63	120	76	10.0	20	/	10	14	2.5	14	68.5	/
SRS65K12076-3S	65	108	100	13.6	30	/	10	14	2.5	14	3.5	/
SRS65K110100-3S	65	110	100	14.0	28	/	11	16	2.5	14	5	/
SRS7012043-3T	70	120	43	10.0	13	M4	3	/	/	/	/	/
SRS70K120100-3S	70	120	100	19.0	31	/	11	20	2	10	74	/
SRS70H10875-3N	70	108	75	10.0	20	4	8	/	/	/	/	2-M8
SRS75K125110-3S	75	125	110	15.0	31	/	9	14	2	14	79	/
SRS75140124-3S	75	140	124	18.0	36	/	11	20	3	/	/	/
SRS84K130100-3S	84	130	100	20.0	32	/	9	15	2	12	88.5	/
SRS85K125127-3S	85	125	127	18.0	36	/	10.5	6	2	6	101
SRS85K137125-3S	85	137	125	18.0	36	/	16	16	2	18	91	/
SRS90K160140-3S	90	160	140	20.0	40	/	15	20	2	18	97	/
SRS100K180140-3S	100	180	140	22.0	42	/	20	20	2	14	105.5	/
SRS23029572-3N	230	295	72	10.0	16	5	22	/	/	/	/	/

Customize Data:
1. Whether Need Through Bore: Diameter of Through Bore
2. Transmission Type ( Power, Signal or Data )
3.  Dimension: Outside Diameter and Length
4.  No. Of Circuits (Power & Signal)
5.  Rated Voltage/ Current
6.  Connecting Way
7.  Rotation Speed
8.  IP Class

IUGIS Supply:
  1. Traditional Slip Ring
  2. Through-Bore Slip Ring
  3. Capsule Slip Ring
  4. Wind Energy Slip Ring
  5. Integral Slip Ring
  6. FORJ Fiber Optic Rotating Joint
  7. SHFRJ High-frequency Slip Ring
  8. Pancake Slip Ring
  9. Mercury Slip Ring
10. Engineering Machinery Slip Ring
11. Wire/Cable Slip Ring
12. Agricultural Machinery Slip Ring
13. Plucker Slip Ring
14. ZS Collector Ring
15. Customized Slip Ring

Our Products Are Widely Used in: Security, Factory Autonation, Electric Instrumentation, Medical, Aerospace, Civil and Military Fields. Such as: Crane, Giant Wheel, Cotton Picker, Medical Equipment, Strander, Webcam, Automatic Revolving Door, Amusement Equipment, Irrigation Machine.....
What is slip ring ?

The collector ring is also called conductive ring, ring, ring, ring bus. It can be used in any electrical and mechanical system that requires continuous rotation at the same time, and needs to transfer the power and signal from a fixed position to a rotating position. Slip ring can improve the performance of the system, simplify the structure of the system, avoid the lead caused by sprain during rotation.

Concept
 
Collector ring series of synchronous and asynchronous motor by using the electric motor in the ring, is widely used in industry, and most are operating in harsh conditions under the These motors although no DC motor as the reversing effect, but with the commutator as, set electric ring or brush of abnormal wear and vibration electric brush and spark and other ills. Special material brush from the point of view, collector ring brush not only the use of graphite brush, and in order to improve the electric current density, sometimes also the use of metal graphite brush, therefore, must also be taking into account factors such as residual abnormal expansion. Even for the high speed motor, such as turbine generator or motor running in the full closed gas medium and hydrogen media, the problem is also a lot of problems.
The material of the collector ring requires high mechanical strength and good conductor of electricity, but also has the corrosion resistance, in contact with the brush sliding, must have the wear resistance and stability of the sliding contact characteristics. In general, the wear resistance of the steel ring is good, and the mechanical strength is big, so it is mostly used for the synchronous motor which has a big difference in the wear difference of the collector ring due to the polarity.
Application:
In general, the wear resistance of the steel ring is good, and the mechanical strength is big, so it is mostly used for the synchronous motor which has a big difference in the wear difference of the collector ring due to the polarity. Steel can be processed into complex structures, it is a readily available and cheap materials, therefore, widely used in including low peripheral speed of turbine generator, synchronous motor. For the case of a turbine generator, the main emphasis is on the mechanical strength and wear resistance of the electric ring, and sometimes the use of forged steel. In addition, the requirements of corrosion resistance, the use of stainless steel, but the sliding properties of stainless steel is not stable, and brush combination is not suitable tend to make the brush beat, easy to cause the brush excessive temperature rise or abnormal wear, so when in use must be doubly pay attention to. Copper casting bronze set electric ring and steel collector ring compared, good sliding properties, so a wide range of uses, but when containing a large number of low melting point lead, because it is through electric heating and lead off phenomenon, easy to cause the collector ring wear brush or abnormal wear.
In the coordination of the electric brush and the electric brush, the brush is too strong and the material of the collecting ring is too soft. Especially the fully enclosed motor high temperature and low humidity, more likely to cause the brush or set wear rings. This is the form of the heavy elephant, the beginning of only a very small wound, the brush in these parts of the poor set of electric sparks. In the event of a spark, the wound becomes progressively worse, and finally forms the same size as the size of the brush sliding contact surface. Therefore, the electric brush can be noticed even if it produces a very small spark.
In order to prevent the occurrence of serious heavy like scars on the steel electric ring, the brush should be mentioned in the motor for a long time to stop. In order to improve the current distribution of the parallel electric brush, the power point of the sliding contact surface of the movable electric collecting ring can be moved. In order to obtain good sliding properties, a spiral in the collector ring slot is effective.
Packaging machinery electronic test equipment, medical equipment, rotary working table exhibition and display equipment manufacturing and processing control equipment robot technology military technology closed-circuit monitoring spherical Yuntai.

Technical Support
Collector ring, commutator, the commutator, which are used for motor?
Collector ring used in AC synchronous motor and AC linear motor on the wound, and the commutator and commutator using in DC motor.
Excuse me, what is the reason why the generator set electric cycle spark is too big?
There are many possible reasons for the spark, such as the corrosion occurred in the contact between the ring and the brush, the brush pressure is too large, the surface of the collector ring is dirty, the brush wear is serious and so on.
Collector ring brush contact wrong what will happen?
May ring fire or direct burning of the slip ring and brush. Specifically: 1, the contact resistance becomes large, the excitation current to reduce the 2, the carbon brush and slip ring overheating, serious will fire ignition between 3 and carbon brush and slip ring, resulting in the slip ring electric corrosion and wear increases.
What is the function of the electric generator?
Simply speaking, the generator collector ring is the terminals of the rotor coil, excitation DC through the brush and the two ring contact is transmitted to the rotor excitation of.
I would like to ask you LPR series of electric current ring can be too much current? Whether to provide installation guidance?
The LPR series of slip ring at maximum to 15 Amps, if you need a higher current, we recommend you to other similar products, such as hollow shaft, LPT series (such as the structure design is not required). Of course, please contact our sales engineer, they will provide installation guidance to you.
LPK series electric ring is able to do the PCB structure design? And the separation, not the whole?
Certainly, our series of disc ring to do the separation and integration of structure design to meet different customer application requirements and the types of LPKS-0205 is a typical example - disc separation slip ring (separated and PCB structure).
Do you have proof of the electric ring?
I Division has not yet achieved explosion-proof certification.
The collector ring has a different size and shape, is the disc collector ring and hollow shaft ring in the application of what is different?
If the user has special requirements on the size or space, such as length (thickness), the conductive ring will be the best solution.
In the actual life of the use of the range, the electric ring can really combine the dust and water it?
Different types of electric rings will be sealed protection level is optional, which is what you said - dust and waterproof. However, the user can not be immersed in water, must be assembled in a protective coat.
Is not all of the collection ring can transmit signals, they have any different?
Basically, the collector ring can signal transmission are as follows: RS232 / RS422 / RS485, FireWire400, USB1.1/USB2.0, PROFIBUS, LonWorks, DeviceNet, INTERBUS, CANbus, ASI, PLC, digital / analog video signal, the digital audio signal.
Why Choose IUGIS ?

1. Professional Manufacturer and Advance Technology Application Develop Rapidly in Domestic Market Over 20 Years !
2. Various Carbon Brush,Carbon Brush Holder,Slip Ring,Inductor,Carbon Vane and etc Can be Supplied by Us !
3. International Approved : ISO9001:2001, CE, RoHS, SGS, CCC... Assure High Quality Products !
4. Optional Material Choice: Imported Material, National Material, Alternative Material !
5. Have a Factory in Jiangsu: Accept Customize, Factory Price, Best Service !
6. Discount up to 30% in Maxium in Large Quantities Demands !


FAQ:

Q:How to get in touch with us?
A:You can click "Contact Now"above,
Q:How to pay?
A:Normally we advise accept T/T, L/C, accept Western Union, Paypal also.

Q:Can you make by customer's design?
A:Yes, we can.Please email your design details to us, we will make as your requirement.

5.What's the delivery time?
A:Normally within 15 days, also depends on your order quantity.


As the product design and specification more than the given product attributes, images, prices are for reference only, welcome to send your design and requests to us, thanks.